TCP/IP Ports and Protocols used in classic VX or VX Prime

Updated by Brett Patram

Scope

This Helpdoc outlines the TCP/IP Ports and Protocols used in classic Telos VX and classic Telos VX Prime hybrid products.

Some of this information is NOT the same for VX Enteprise, VX Prime Plus or VXs products. Please see THIS HELPDOC if you have these systems

Ports Used

Port

Protocol

Function

80

TCP

HTTP web server via LAN interface

8080

TCP

HTTP web server via WAN interface. Disabled by default. Can be enabled by user, port can be changed by user

22

TCP

SSH via LAN interface

1022

TCP

SSH via WAN interface. Disabled by default. Can be enabled by user, port can be changed by user

5004

UDP

Default Livewire RTP port for multicast audio. Default AES67 RTP port for multicast audio. AES67 RTP port can be changed per each hybrid sender or receiver. Via LAN interface

5060

UDP

SIP port for call setup. Port can be changed by user per each SIP server entry. Via WAN interface

40000-40050

UDP

RTP unicast for VSET or Phone Screening software caller "handset" audio streams. Via LAN or WAN interface

Required for VSET/ call screening software

62000-62513

UDP

RTP SIP ports that the VX product will request SIP caller audio to be sent on. (RTP SIP Receive port range via WAN interface)

20518

TCP

LWCP (Livewire control protocol) used with VSETs or call screening software to communicate/control VX systems. Via LAN interface. Disabled by default on WAN interface, but can be enabled by user.

Required for VSET/ call screening software

Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please contact us.

How did we do?