Factory reset Axia Router Control Panels

Updated by Bryan Jones


This applies to the Axia X1, X2, and XY router control panels.


If for any reason, you find it necessary to reset the Router Control Panel, this what needs to be done:

  1. Press the Scroll Knob and Take button on the right-hand side of the panel.
  1. Power up the unit while holding these buttons.
  2. Hold these buttons until you see the words “Factory Reset” displayed.
This will take approximately 20 seconds.

Once you see “Factory Reset” you may release the buttons. After the unit has rebooted, you will see the same setup screen that is displayed when a new unit powered up for the first time. Follow the steps from the manual to reset the IP Address of your unit. Click here for the current Manual.

How did we do?