Rack Mounting a Single Telos Alliance xNode

Updated by Johnny Goldsmith

Scope

This document refers to all versions of Telos Alliance xNodes.

All xNodes come standard with a rack mount kit. One unit can be mounted in a single rack space, or two can be mounted side by side.

To see how to mount an xNode to a flat surface, click here.

To see how to rack two xNodes side by side, click here.

Mounting a single xNode

xNodes are shipped with one short rack ear and one long rack ear that look like this.

Using a #2 Phillips screwdriver secure a short rack ear to one side of the xNode using two M4 X 10MM flat head screws (provided). Secure the long ear to the opposing side.

For single-node mounting, the long and short brackets can be mounted on either side of the xNode for left or right-hand mounting.

When mounted, the brackets will look like this.

The "L" Bracket

Each xNode also comes with an "L" Bracket.

This bracket is for racking two xNodes together. If you're only mounting one node, save this bracket for possible future use.

If you are in need of any of these pieces of hardware please contact us for prices and availability using the following part numbers

  • Short Rack Ear- 1451-00671
  • Long Rack Ear- 1451-00670
  • "L" Bracket (with screws)- 1771-00128

Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please contact us.


How did we do?