Axia GPIO for Film Cap Buttons
Film Cap User buttons module, Acessory Panel, or Rack Panel GPIO Table
Note to users of iQ and Radius consoles. When configuring the button to interface with a GPIO port, select the “Livewire Mirror” option followed by a Livewire number (1 -32767) in the GPIO Channel field. The corresponding GPIO port should have a matching Livewire number.
Inputs (GPI)
ID | Name | Pin | Notes |
GPI 1 | BUTTON 1 lamp (top button) | Pin 11 | Illuminates the button while active |
GPI 2 | BUTTON 2 lamp | Pin 12 | Illuminates the button while active |
GPI 3 | BUTTON 3 lamp | Pin 13 | Illuminates the button while active |
GPI 4 | BUTTON 4 lamp | Pin 14 | Illuminates the button while active |
GPI 5 | BUTTON 5 lamp (bottom lamp) | Pin 15 | Illuminates the button while active |
Outputs (GPO)
ID | Name | Pin | Notes |
GPO 1 | SWITCH 1 (top button) | Pin 1 | Active when button pressed |
GPO 2 | SWITCH 2 | Pin 2 | Active when button pressed |
GPO 3 | SWITCH 3 | Pin 3 | Active when button pressed |
GPO 4 | SWITCH 4 | Pin 4 | Active when button pressed |
GPO 5 | SWITCH 5 (bottom button) | Pin 5 | Active when button pressed |