Button Caps for VSet Console and Desktop Controllers

Updated 5 months ago by Johnny Goldsmith

Scope

This document covers replacing all of the button caps found on either a VSet Console Controller or a VSet Desktop Controller.

A VSet Desktop Controller:

VSet Desktop Controller

If you are looking for button caps for a VSet6 or VSet12, click here.

The Caps

Over time, the button caps can become cracked or broken from excessive (or aggressive) use. The good news is that they are field replaceable.

If a cap needs to be replaced, contact customer support and ask for pricing and availability using the below part numbers.

Removing and Replacing Caps

You can remove any of the caps by pulling them off carefully with a pair of needle-nose pliers, exposing the cap insert slot.

When grabbing the cap with the pliers, be careful not to scratch the surface of the controller.

Insert the new cap into the slot by hand and press firmly to install.

Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please contact us.


How did we do?


TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)