Axia GPIO for Studio Monitor

Updated 2 months ago by Bryan Jones

Studio Monitor GPIO Table

This may also be referred to as Monitor 2 in original Element consoles.
Inputs (GPI)
ID
Name
Pin
Notes

GPI 1

MUTE Studio Command

Pin 11

Mutes Monitors while active

GPI 2

DIM Command

Pin 12

Dims Monitors while active

GPI 3

RESET Timer Command

Pin 13

Starts or resets Timer on console

GPI 4

START Countdown Timer Command

Pin 14

Starts Countdown Timer from preset max (Element and Fusion only)

GPI 5

Not used

Pin 15

Outputs (GPO)
ID
Name
Pin
Notes

GPO 1

MUTE lamp

ON AIR lamp

Pin 1

Latching during Studio MUTE state

GPO 2

DIM lamp

Pin 2

Latching during DIM state

GPO 3

START/RESET lamp

Pin 3

Momentary indication of Timer change state

GPO 4

Countdown START lamp

Pin 4

Momentary indication of Countdown timer start from preset max (Element and Fusion only)

GPO 5

TALK TO STUDIO lamp

Pin 5

Latching during an active TALK TO STUDIO


How did we do?


TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)