Axia GPIO for Studio Guest Mic Profiles

Updated 5 months ago by Bryan Jones

Studio Guest Mic GPIO Table

The "Studio" is defined as "talk" studio. The console is not located in this room. Studio Guest Microphones will mute only the Studio Monitors (Monitor 2), not the Control Room Monitors.
Inputs (GPI)
ID
Name
Pin
Notes

GPI 1

ON Command

Pin 11

Momentary turns ON the console channel, mutes Studio Monitors

GPI 2

OFF Command

Pin 12

Momentary turns OFF the console channel

GPI 3

TALK TO CR Command

Pin 13

Active = TALK TO CONTROL ROOM

Will MUTE channel

GPI 4

MUTE Command

Pin 14

Mutes console channel

GPI 5

Not used

Pin 15

Outputs (GPO)
ID
Name
Pin
Notes

GPO 1

ON lamp

Pin 1

Latching during ON state, unless TALK or MUTE active 

GPO 2

OFF lamp

Pin 2

Latching during OFF state

GPO 3

TALK TO CR lamp

Pin 3

Latching during active TALK TO CONTROL ROOM state

GPO 4

MUTE lamp

Pin 4

Latching during an active MUTE state

GPO 5

Not used

Pin 5


How did we do?


TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)