Axia GPIO for Control Room Guest Mic Profiles
Updated
by
Bryan Jones
Control Room Guest Mic GPIO Table
Inputs (GPI)
ID | Name | Pin | Notes |
GPI 1 | ON Command | Pin 11 | Momentary turns ON the console channel, mutes CR Monitors |
GPI 2 | OFF Command | Pin 12 | Momentary turns OFF the console channel |
GPI 3 | TALK TO CR Command | Pin 13 | Active = TALK TO CONTROL ROOM Will MUTE channel |
GPI 4 | MUTE Command | Pin 14 | Mutes (cough) console channel - Must be held low for duration of muting |
GPI 5 | Not used | Pin 15 |
Outputs (GPO)
ID | Name | Pin | Notes |
GPO 1 | ON lamp | Pin 1 | Latching during ON state unless TALK or MUTE active |
GPO 2 | OFF lamp | Pin 2 | Latching, during OFF state |
GPO 3 | TALK TO CR lamp | Pin 3 | Latching during active TALK TO CONTROL ROOM state |
GPO 4 | MUTE lamp | Pin 4 | Latching during an active MUTE state |
GPO 5 | Not used | Pin 5 |
