No uMPX Streams MkII O9 When Using Livewire

Updated by Mark Manolio


This document explains how to ensure that uMPX streams reach their destination when using Livewire on an Omnia.9.


Q: I'm using an Omnia.9 MkII that has uMPX encoding and Livewire both active. When I send uMPX streams to my MPX Node Decoder, it does not receive any stream. What can I check?


A: Ensure that there is no Gateway address set for the LAN NIC in the Omnia.9. You should only set a Gateway address for the WAN NIC connected to the Internet or WAN feeding your network with connectivity to the MPX Node(s).

Let us know how we can help

If you have further questions on this topic or have ideas about improving this document please contact us

How did we do?