Axia GPIO for Line Source types

Updated 2 months ago by Bryan Jones

Line Profile GPIO Table

Inputs (GPI)

ID
Name
Pin
Notes

GPI 1

ON Command

Pin 11

Momentary turns ON the console channel, triggers START pulse

GPI 2

OFF Command

Pin 12

Momentary turns OFF the console channel, triggers STOP pulse

GPI 3

PREVIEW Command

Pin 13

Active = PREVIEW ON

Not Active = PREVIEW OFF

GPI 4

RESET Command

Pin 14

Momentary turns OFF the channel w/o generating a GPO STOP pulse

GPI 5

READY Command

Pin 15

Latch to indicate READY (OFF button illuminated) for profiles defined with the READY enable

Outputs (GPO)

ID
Name
Pin
Notes

GPO 1

ON lamp

Pin 1

Latching, during ON state

GPO 2

OFF lamp

Pin 2

Latching, during OFF state, and READY command if enabled

GPO 3

PREVIEW lamp

Pin 3

Latching, during PREVIEW state

GPO 4

START pulse

Pin 4

Momentary 100ms pulse at transition to ON

GPO 5

STOP pulse

Pin 5

Momentary 100ms pulse at transition to OFF


How did we do?


TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)