Shipping Box and Foam for Voltair

Updated by Johnny Goldsmith

Scope

This document is written for the 25-Seven Voltair but also applies to the 25-Seven TVC-15, as these units share the same chassis dimensions.

When shipping a Voltair, or any piece of broadcast equipment, we highly suggest using proper packaging to protect your broadcast investment. Telos Alliance has specially fit packaging for all of its products that should be utilized when shipping and storing highly valuable equipment.

We suggest saving the box and packaging when you first receive your Voltair. If you ever need to send it to the factory, you can use the original box and we will return your unit to you in a new box which you should also hold on to.
We cannot be responsible for any damage to the Voltair caused during the shipping process.

The Box and Foam

If you are looking to order a box and foam prior to sending your Voltair to the factory, contact us to get current pricing on part number 1071-00289-100, which includes the box and two end caps of foam. We will also need a shipping address to provide an accurate shipping quote.

We have specially-measured foam that will supply suitable protection for your Voltair during the rigors of shipping:

The foam and Voltair then fit securely and tightly in the shipping box:

Let us know how we can help

If you have further questions on this topic or have ideas about how we can improve this document, please contact us.

How did we do?