Replacing Black Oval Element Monitor and Phone Module Button Caps
Updated
by
Johnny Goldsmith
Scope
This document covers replacing the black oval button caps found on the Monitor/Navigation and Call Controller modules:
The Caps
Over time, the button caps can become cracked or broken from excessive (or aggressive) use. The good news is that they are field-replaceable.
If a cap needs to be replaced, contact customer support and ask for pricing and availability using the below part numbers.
Replacing the Caps
Unlike the round caps also found on Element modules, the oval caps can simply be pulled off of the switch connected to the board of the module with your fingers.
To install a new cap, ensure the orientation is correct and simply insert the cap into the fitting on the switch.
Let us know how we can help
If you have further questions on this topic or have ideas about improving this document, please contact us.
