Shipping Box and Foam for an xNode

Updated 2 weeks ago by Johnny Goldsmith

Scope

This pertains to all styles of Telos Alliance xNodes:

  • 2001-00297-000 Telos Alliance Microphone xNode
  • 2001-00298-000 Telos Alliance Analog xNode
  • 2001-00299-000 Telos Alliance AES/EBU xNode
  • 2001-00300-000 Telos Alliance Mixed Signal xNode
  • 2001-00301-000 Telos Alliance GPIO xNode

When shipping an xNode, or any piece of broadcast equipment, we highly suggest using proper packaging to protect your broadcast investment. Telos Alliance has specially fit packaging for all of its products and should be utilized when shipping and storing equipment.

We suggest saving the box and packaging when you first receive your xNode. If you ever need to send it to the factory, you can use the original box and we will return your unit to you in a new box which you should also hold on to.
We cannot be responsible for any damage to an xNode caused during the shipping process.

The Box and Foam

If you are looking to order a box and foam prior to sending your xNode to the factory, contact us to get current pricing on the following part numbers:

  • xNode box - 1071-00062-000
  • xNode LEFT foam - 1071-00063-000
  • xNode RIGHT foam - 1071-00064-000

The foam is specially measured and will supply suitable protection for your xNode during the rigors of shipping:

The foam and xNode then fit securely and tightly in the shipping box:

Let us know how we can help

If you have further questions on this topic or have ideas about how we can improve this document, please contact us.


How did we do?


TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)