Axia GPIO for Operator Microphone Source types

Updated 3 months ago by Bryan Jones

Operator Microphone Profile GPIO Table

Inputs (GPI)
ID
Name
Pin
Notes

GPI 1

ON Command

Pin 11

Momentary turns ON the console channel

GPI 2

OFF Command

Pin 12

Momentary turns OFF the console channel

GPI 3

TALK TO STUDIO Command

Pin 13

Active = TALK TO STUDIO

Will MUTE channel

GPI 4

MUTE Command

Pin 14

Mutes console channel

GPI 5

TALK to source in Preview Command

Pin 15

Active = Initiates Talkback to channels that are in PREVIEW from operator mic

Will MUTE channel

Outputs (GPO)

ID
Name
Pin
Notes

GPO 1

ON lamp

Pin 1

Latching during ON state unless TALK or MUTE active 

GPO 2

OFF lamp

Pin 2

Latching, during OFF state

GPO 3

TALK TO STUDIO lamp

Pin 3

Latching during active TALK TO STUDIO state

GPO 4

MUTE lamp

Pin 4

Latching during an active MUTE state

GPO 5

TALK to source in Preview lamp

Pin 5

Latching during an active TALK


How did we do?


TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)