Telos VSet - Setting IP Address


This article discusses how to set the IP address on your Telos VSet phone controller.


The IP address of the VSet can only be changed from the front panel menu following the instructions below. There is more about this in the product manual and in the quickstart guides that ship with the product, so we'll cover it shortly here:

  1. Press the Menu button
  2. Find the Setup menu item (you may need to scroll down)
  3. Press and Hold the numbered line key next to Setup for five seconds and release
  4. To set the VSet's IP address and Subnet Mask, select the appropriate row with the numbered line keys and enter the address using the number pad. The star (*) key is dot (.) and the pound (#) key is backspace.
  5. Press GO to save changes.
  6. Press Menu to exit
Note that step 3 has you pressing and holding a line key for five seconds and releasing. If you just press the line button without holding it down first, you will be entering the Setup menu in "read only" mode and you won't be able to make any changes.

Let us know how we can help

If you have further questions on this topic or have ideas about how we can improve this document, please contact us.

How did we do?