Setting Streaming to use Audio Input 2

Updated by Mark Manolio

Scope

This document describes how to set streaming to use audio Input 2 instead of Input 1.


Description

Q: Currently Input 1 on my Omnia.9 drives FM, HD1 and the streaming encoder. Input2 drives HD2. How do change the stream to follow input 2?


Solution

A: First, make sure that "Streaming Cores" is set to "2" in System / System Configuration / Processing Paths. Click "Apply Config" and reboot if needed. Now, FM & HD1 will use Input 1 and HD2 & Streaming 2 will use Input 2. The inputs are configured in System / I/O options / Input 1 and Input 2.


Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please contact us.


How did we do?