Blocking Only Certain Calls Using an Hx6 or iQ6

Updated by Johnny Goldsmith

Scope

This document explains how to leave specific lines unblocked when using the "Block All" function on a VSet with an Hx6 or iQ6.


The Process

You can select which lines to leave open in the Web User Interface, under the Setup Wizard tab. Once in the Setup Wizard, you will see the Show Line Configuration section.

Select the lines you don't want "busied out" when the "Block All" function is used on the VSet by marking them as Priority.

Be sure to hit the Apply button for the changes to take effect.

In the example above, only the listener lines 1-4 will be blocked when the "Busy All" button is pressed on the VSet6.


Let us know how we can help

If you have further questions on this topic or have ideas about improving this document, please contact us.


How did we do?