Shipping Box and Foam for a Z/IP ONE

Updated 4 months ago by Johnny Goldsmith

Scope

This document covers the Telos Alliance box and foam cap part numbers needed when shipping a Z/IP ONE IP broadcast codec.

  • 2001-00286-000 Z/IP ONE - Analog
  • 2001-00289-000 Z/IP ONE - Analog + AES

When shipping a Z/IP ONE, or any piece of broadcast equipment, we highly suggest using proper packaging to protect your broadcast investment. Telos Alliance has specially fit packaging for all of its products and should be utilized when shipping and storing equipment.

We suggest saving the box and packaging when you first receive your Z/IP ONE. If you ever need to send it to the factory, you can use the original box and we will return your unit to you in a new box which you should also hold on to.
We cannot be responsible for any damage to an xNode caused during the shipping process.


The Box and Foam

If you are looking to order a box and foam prior to sending your xNode to the factory, contact us to get current pricing on the following part numbers:

  • Z/IP ONE box - 1071-00052-000
  • Z/IP ONE foam - 1071-00053-000 (will need two)

The foam is specially measured and will supply suitable protection for your Z/IP ONE against the rigors of shipping.

The foam and xNode then fit securely and tightly in the shipping box:


Let us know how we can help

If you have further questions on this topic or have ideas about how we can improve this document, please contact us.


How did we do?