Telos VSet

7 articles

Telos VSet - Using Test Mode

Starting test mode will disconnect the Vset from the phone system and will be inoperable until reboot. Accessing Test Mode. Press the MENU button and look for the SETUP option. . If you have a VSet 6…

Updated 1 week ago by John (JP) Powell

VSet Ringer Mute / Volume

This article explains how to enable, disable, and troubleshoot the ringer on the VSet Phone set.

Updated 1 week ago by John (JP) Powell

Delay Dump ($%!) Button

This article covers the use of the DELAY ($%!) dump button on the VSet phones and controllers and how to set it up.

Updated 1 week ago by John (JP) Powell

I can't put calls on the air from the VSet

The Telos VSet phone set has two modes of operation: Talent Mode. This mode is for the operator(s) of the phone hybrid system. In this mode, calls can be placed on the air, taken to handset, placed o…

Updated 1 week ago by John (JP) Powell

Telos VSet - Setting IP Address

Scope. This article discusses how to set the IP address on your Telos VSet phone controller. Description. The IP address of the VSet can only be changed from the front panel menu following the instru…

Updated 1 week ago by John (JP) Powell

Telos VSet - Reset to Factory Defaults

These instructions guide the user through resetting the VSet 6 or VSet 12 to factory default settings. This does not affect the IP address of the VSet.

Updated 1 week ago by John (JP) Powell

Telos VSet - Changing Studio

This article discusses how to log the VSet into another Studio.

Updated 1 week ago by John (JP) Powell

TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)