Hx6/iQ6

6 articles

Known issue with xScreen and Hx6 / iQ6 version 7

There is a known software combination that causes Hx6 or iQ6 to crash when it is working in conjunction with xScreen from Broadcast Bionics. Read the following for more information.

Updated 3 days ago by John (JP) Powell

Converting an Hx6 between Analog and AES

How to convert an Hx6 to analog or AES.

Updated 5 months ago by Johnny Goldsmith

How to factory reset the Hx6 or iQ6 Talk Show systems

Scope. This procedure covers the steps needed to factory rest a Telos Hx6 or Axia iQ6 Talk Show system. Description. The Hx6 and iQ6 can only be reset using the front panel menu. Options to restore d…

Updated 6 months ago by Bryan Jones

No Caller ID Display - Logging Caller ID decoder

This article covers the Hx6 and iQ6 Talkshow Systems. It describes why your system may not be receiving caller ID and how to monitor the systems internal CID decoder using Telnet.

Updated 8 months ago by John (JP) Powell

Configure Line Ringing on iQ6 or Hx6 using Livewire GPIO

SCOPE. This article applies the Telos Hx6 and iQ6 six-line telco gateway. iQ6 and Hx6 are functionally identical, however, the iQ6 only uses Livewire IN/OUT. There are no Analog/AES connections on an…

Updated 11 months ago by Bryan Jones

What remote control capabilities does the Hx6 and iQ6 have?

SCOPE. This applies to the Hx6 and IQ6 Talk Show systems. 2001-00342-000: Hx6 POTS + Livewire and Analog I/O. 2001-00343-000: Hx6 POTS + Livewire and AES I/O. 2001-00248-000: Telos iQ6 Six-Line Telco…