All Categories > Telos > Streaming > Z/IPStream X2 and 9X2
6 articles
If you need to move your X/2 installation to a new PC we tell you how you can easily migrate your settings.
Updated 4 weeks ago by Mark Manolio
Scope. This document covers adding and activating Licenses for the Z/IPStream X/2 and 9X/2; when the computer where the software is installed does NOT have access to the Internet or can not reach the…
Updated 3 months ago by Bryan Jones
Scope. Copying a user processing preset from the old Omnia or Z/IPStream A/XE to Z/IPStream X/2 Description. After upgrading from the old Omnia or Z/IPStream A/XE software to Z/IPStream X/2, you can…
Updated 4 months ago by Mark Manolio
Scope. The capabilities of the Telos Z/IPStream X/2 and 9X/2 streaming software can be expanded by adding additional licenses. The steps found here apply only to the Z/IPStream X/2 and 9X/2 software.…
Updated 7 months ago by Bryan Jones
Scope. This document describes how to perform manual activation when the PC is not connected to the Internet. Description. If you install the Z/IPStream X/2 or 9X/2 software on a PC with only local n…
Updated 7 months ago by Mark Manolio
The Axia IP-Audio Driver is INCLUDED with Z/IPStream X/2 and 9X/2. Here is how to get it installed and activated
Powered by HelpDocs (opens in a new tab)
