Updating your 25-Seven Program Delay Manager (PDM) to version 2.5.12

Updated 1 week ago by Bryan Jones


This document applies to the 25-Seven Program Delay Manager (PDM) running versions 2.5 with Module numbers B600 and higher.  If you are running 2.4 (or older) or have a Module number B599 or lower, this update does not apply to you.

Release Notes for this update

PDM 2.5.12 New Features (August 2020)

Downloads for this version listed below under "Obtaining the files"

  • Updated web UI to be HTML5; Adobe Flash no longer required
The following are updates from other versions which are also included in this update. You do not need to install previous versions. However, you may click the download link if you need that version.
PDM 2.5.10 Fixes (May 7, 2019)

Download version PDM-2.5.10

  • Add Livewire silence and clipping detection
  • Add Livewire audio level metering.
  • Add “LWStreamFail” GPO, which becomes active when Livewire stream fails
  • Add missing “Pause” GPI to Livewire web UI
  • Fixed rare issue where Livewire stream could fail if GPIO is being processed during network instability
  • Other internal clean up (updated Copyright dates, etc).
PDM 2.5.9 Fixes

Download version PDM-2.5.9

  • Add the ability to drive both old and new CFA635-TML-KU LCD displays.
  • Fix crash when type "help help" into command interface.
  • Other internal clean up (updated Copyright dates, etc).
PDM 2.5.8 Fixes

Download version PDM-2.5.8

  • Fixed issue where internal logs were not rotating properly.
  • Fixed issue where, in rare cases, PDM might appear to randomly go into BYPASS.
  • Other internal clean up (updated Copyright dates, etc).
PDM 2.5.6 New Features (Sept 2016)

Download version PDM-2.5.6

  • Delayed data can now be received and sent over UDP packets. PDM now supports UDP, TCP, and RS-232 data delay.  
  • Added the ability to download delayed data log directly from hidden page downloaddatalog.html 
  • Added the ability to log all delayed data (and then download via downloaddatalog.html) by clicking the enabled checkbox for “Detailed logging” under the Delayed Data Streams option on the web configuration page. 
  • Add startup mode choice: bypass (default), empty, or building.
  • Input sample rate changes are now automatically handled; the service menu now shows the internal sample rate; "AES/EBU input rate" menu on the web configuration page has been removed.
  • Added "GMT+13" and "GMT+14" time zones
PDM 2.5.6 Fixes (Sept 2016)
  • Improved error messages when testing PD Alert emails
  • Improved robustness of remote connections if the client was slow
  • Now periodically log CPU temperature
PDM 2.5.3 updates (May 2015)

Download version PDM-2.5.3

  • 01688: Fixed issue where Livewire GPIO input/output configuration popups were off by one.  For example, picking Flag 2 as input, you would need to pick Flag 1 as output. This was a display issue only, no updates to the configuration are needed after installing this update.
  • 01092: Add auto restart to PDM watchdog service. If internal application exits unexpectedly it is logged and then immediately restarts the service.
  • 01706: Fixed issue where the system could crash if DUMP button was inadvertently held for a long period of time.
PDM 2.5.2 updates (Dec 2014)

Download version PDM-2.5.2

  • 01644: Setting Livewire source channel 2550 doesn't take, reverts to former value. This caused PDM to reject a number of legal Livewire source channel numbers (e.g. 2550).
  • Updated installer so that it can only install on correct hardware platforms.
  • Fixed delayed data and GPIO to better align with the true audio delay
LSP-3.6 updates (Dec 2014) 

Download version LSP-3.6

  • 01635: bash updated to close Shellshock vulnerability 
  • 01621: Add missing LAME libraries to allow MP3 encoding in PD­Alerts
  • 01620: Fix permissions on smtp configuration so PD­Alert Test works


Software releases are comprised of one or more software packages which you may obtain from various methods. Each file name will end with a standard .257 suffix, indicating that it is a 25-Seven Systems software update.

Obtaining the files

There are three possible files needed depending on your current versions. Please compare the following files with the current version found on the WebUI under the INFORMATION link.

Click on the file name to download the file and store the file in a local directory on your computer. Keep track of where you save them, you will need them in the next step.

  1. Take your PDM unit out of the air chain. Analog/AES users can place the PDM in Bypass mode.  Livewire users will want to route PDM out of the IP-audio program chain. 
  2. Log into your update page of your PDM by using a web browser. Do this by entering /update.html after the IP address of the unit (EG: Your user name is pdmweb, and your default password is pdmwebBXXX where “BXXX” is the module number of your unit as found on the information screen. User configurable web passwords were added in PDM version 2.0; check your LCD under “System” to verify the password if it has changed from the factory default.
  3. Follow on-screen instructions from the Update page: browse your computer to the first of the.257 files you were sent, choose the file, and then press Submit. Updating will take a couple of seconds. When complete, you should see a “Success” notification at the bottom of the browser page.  Use the “click here” link to return to the main browser page. Note that if your PDM versions already match the versions listed below then you do not need that update.  Current versions are found on the INFORMATION page.
  4. Repeat step 3 for each supplied update file, making sure to install in the following order. If the versions you have downloaded do not match these versions please do not proceed and contact our support department.
    1. 1601-00491-011{AXIA-1.1.2}.257
    2. LSP-3.6.257
    3. 1601-00490-013{PDM-2.5.12}.257
  5. Return to the update page and verify the versions have been installed. If everything looks good, return to the web control pages by removing /update.html from the address line and then reloading the page.
  6. Once all updates have been loaded, power cycle your PDM.

Additional Notes

In the event that you get a “Failure” message after attempting to install any package, install ClearProduct2.257, then retry installing the package that failed.  ClearProduct2.257 is a software utility that shuts down any resident software services that may be preventing the installer from doing its job. In most cases, you will not have to run this utility. Click here if you need to download the ClearProduct file.
After installing this update, you may need to flush your browser’s cache or force a reload in order to see any fields or features in the Configuration page. 
In some circumstances, if you are using Livewire, the Axia IP Driver does not start correctly after an update.  This is evident as the unit will constantly display “waiting for stream” on the main display.  If this happens, please return to Step 1 above and re-install just the AXIA-1.1.2 software.

Let us know how we can help

If you have further questions on this topic or have ideas about how we can improve this document, please contact us.

How did we do?

TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)