Pathfinder Pro (PC)

12 articles

Logging Route changes and Route Requests

Instructions on how to turn on logging of SA Protocol route commands from an automation system and make sure the routes are made correctly.

Updated 2 months ago by Bryan Jones

Limiting Pathfinder logging to a specific Protocol Translator

Instructions how to limit Protocol Translator logging to specific translators as opposed to all.

Updated 2 months ago by Bryan Jones

Setting up device connect or disconnect message in Pathfinder logs

Scope. This document will describe how to enable or disable device connect and disconnect messages in the Windows version of Pathfinder. Note, this document does not apply to web-based Pathfinder Cor…

Updated 2 months ago by Bryan Jones

Using delayed actions in Pathfinder stack events

Scope. This article applies to the use of delays actions in Pathfinder Stack Events specifically as it relates to using them for "safety" purposes. Description. For safety reasons, sometimes, we want…

Updated 3 months ago by Bryan Jones

Removing unused devices from Pathfinder PC Pro Server

Scope. This document covers the removal of devices from the Windows version of Pathfinder Server and applies to both the PRO and non-Pro (PC) versions. Description. You have devices in your Pathfinde…

Updated 5 months ago by Bryan Jones

Setting Individual Silence and Clipping Level Thresholds in Pathfinder PC

Covers setting individual Silence or Clipping levels that override the system default.

Updated 5 months ago by Bryan Jones

Turn on logging of all Pathfinder Stack Events

Scope. This document covers the steps needed to turn on logging for Stack Events in Pathfinder PC and Pro version. This includes the Windows version of Pathfinder, not the Pathfinder Core PRO applian…

Updated 5 months ago by Bryan Jones

How to Manually Sync your Backup Server

Scope. This article describes how to sync your Pathfinder Servers files and databases to any backup server. Before we start its always a good idea to backup all the files on both machines incase some…

Updated 6 months ago by Jose Lemus

Migrating Pathfinder to a new PC

Scope. This article describes how to migrate your Pathfinder Server files and databases to a new PC or server. If you are working with a clustered Pathfinder Server configuration, both servers need t…

Updated 6 months ago by Tim Chimes

Why aren't my new sources shown in Pathfinder?

SCOPE. This document applies to all Windows versions of Pathfinder software. It is not applicable to the Pathfinder Core Pro. DESCRIPTION. I have enabled some new sources but they are not shown as av…

Updated 6 months ago by Bryan Jones

Sending and receiving generic text strings with Pathfinder PC Pro

SCOPE. This document applies to the Windows version of Pathfinder Server. It covers both the Pro and non-Pro versions of Pathfinder Server. DESCRIPTION. Many devices can send and receive strings of t…

Updated 8 months ago by Bryan Jones

Turn on GPIO logging in Pathfinder Pro

SCOPE. This applies only to the Windows version of Pathfinder server. If you are using the Pathfinder CORE Pro appliance this does not apply. ENABLE LOGGING. Logging is enabled and disabled from the…

Updated 9 months ago by Bryan Jones

TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)