TelosHelp
  • Main Telos Webpage
  • Request Support
  • Request an RMA
  • Contact

All Categories ​>​ ​Axia ​ > ​ ​iQx AoIP Console

iQx AoIP Console

4 articles

iQx Surface - Using Test Mode

Before we begin. Please take the time to read through this document before starting any work. The iQx system has a built in self-test for performing diagnostics on surface hardware. Disconnect all ca…

Updated 1 week ago by John (JP) Powell

Updating software on your iQ series console

Scope. This document describes the process of updating software on an iQ series console. The update process is the same on many of these consoles. Specifically, this applies to these consoles. 3002-0…

Updated 1 week ago by Bryan Jones

Reset iQx Web UI Password

Scope. This procedure is needed when the iQx web Ui password is changed and subsequently forgotten. The default web UI credentials are: Username: user Password: (none) Please ensure these credentials…

Updated 10 months ago by Shaun Dolan

Axia iQx version 1.3.3 software, update instructions, and release notes

SCOPE. This article covers the (2001-00518-000) Axia iQx AES67 Console. Note that while some consoles look similar, this does not apply to the Axia iQ or Radius consoles that use the QOR engine. PREP…

Updated 10 months ago by Bryan Jones

TelosHelp (opens in a new tab)

Powered by HelpDocs (opens in a new tab)

Contact