Omnia.9sg

4 articles

Using the Omnia9sg with the Omnia.11

Considerations when using an Omnia.11 and Omnia 9SG in "split" mode. For example the Omnia.11 is at the studio and your 9SG is at the transmitter.

Updated 1 month ago by Mark Manolio

Downloading Cue Tone Files for Local Ad Insertion

Scope. This document describes where to find the cue tone audio files for use when using the optional Local Input feature of the Omnia 9.SG for local ad insertion. Description. The Omnia 9.SG Manual…

Updated 5 months ago by Mark Manolio

Setting Up 9SG For Silence Or Internal Player GPO

There 2 physical GPO’s (A&B - which are output on Pins 24 and 12 respectively of the rear panel GPIO connector - pins 13, 23 & 25 are Ground). Livewire capability expands this to 20 IP based GPO’s: f…

Updated 6 months ago by Mark Manolio

Omnia.9sg version 3.20.04 software install and release notes

Updating your Omnia.9sg software is done using the NfRemote client. This procedure assumes you have already installed and have access to your Omnia.9sg. Please refer to the Omnia.9sg manual for instr…

Updated 9 months ago by Bryan Jones

(opens in a new tab)

Omnia.9sg

Using the Omnia9sg with the Omnia.11

Downloading Cue Tone Files for Local Ad Insertion

Setting Up 9SG For Silence Or Internal Player GPO

Omnia.9sg version 3.20.04 software install and release notes

Contact