Using an ATM without Adobe Flash

ATM Rack Ears

Updating your 25-Seven Program Delay Manager (PDM) to version 2.5.14

Changing the start up mode of your Program Delay Manager (PDM)

Obtaining logs from your PDM

First generation PDMs and Adobe Flash

Program Delay Manager (PDM) and Adobe Flash

Updating your 25-Seven PDM to version 2.4.1

The PDM Web Page and Port Mapping

Switching the PDM From AES to Livewire I/O

Controlling the 25-Seven Profanity Delay Manager (PDM) with Fusion user buttons

Delaying closures with the PDM

PDM Rack Ears

GPIO for the PDM

Backing up your Program Delay Manager (PDM) configuration

Program Delay Manager (PDM) input does not change when using Livewire

Release candidate Version 1.0.1-Rc4

Does the PDMII output post-delay audio on all outputs?

RS232 to Ethernet Support for PDM II

25-Seven Program Delay Manager Control Menu

Enabling Telos Connect in PDM II

Downloading Logs from the PDM II

PDM Dump Archive - How to Delete Files

Properly Grounding a TVC-15

Obtaining Logs From Your TVC-15

Updating Voltair firmware from verison 1.2.1 and earlier

Fans in a Voltair

Can I calibrate multiple PPM encoders for my Voltair?

Can an analog Voltair be converted to AES and vice versa?

Shipping Box and Foam for Voltair

Properly Grounding a Voltair

"Cannot Find Audio Hardware" error message

My Voltair is not showing continuous readings

How to read the meters on a Voltair

Obtaining 30-Day Logs from your Voltair

Axia IP Intercom: Using a Livewire source for the mic

Test Mode for Axia IP Intercom Panels

Restarting the Intercom service in an Element or Fusion Console

Testing a Fader Power Brick for Element or Fusion

Replacement Round Caps for Element Modules

Replacing On and Off Caps on Element Modules

Replacing Black Oval Element Monitor and Phone Module Button Caps

My Element On Light is Flashing

Element and Fusion Module ID information

Element and Engine Compatibility Information (Engine release notes)

Using PuTTy to monitor Element Power Supply GPIO

I Have an Up/Down Arrow on My Element Display Channel

Why are the GPIO status indicators not working on my Element power supply?

Capturing Element or Fusion Console Modules

Changing Element or Fusion On/Off Switches

Over-Bridge Shows "X" Instead of Channel Position Number

Viewing and Changing the Element GPIO Power Supply IP Address

Element GPIO PSU Battery Replacement

Element Replacement Fader Knobs

Removing a CAN Bus distribution board from an Element console

Cleaning and Lubricating Element (and Fusion) Faders

Fanless Engine Corrective Field Action Recommendation

Resetting an Engine to Factory Defaults

Studio Engine BIOS for Intel D865GLC

Bios settings for Asus N4L-VM DH for Axia Studio Engine

My Axia Fanless Engine Says PSU Failure

Element VIA EPIA-M Bios Settings

Ethernet switches that have been used for Livewire+

Configuring Netgear M4250 switch for Livewire+ AES67

Configuring the Cisco Catalyst 2960X/CX Series of Switches for Livewire®

Ethernet Networking with Telos Alliance products

Evaluating Ethernet Switches for AoIP

Cisco Switch Troubleshooting Commands

IGMP: Is it ok to have "querier" enabled all switches?

Configuring Cisco Catalyst 1000 Series Switches for Livewire

How to setup Switched Port Analyzer (SPAN) on Cisco switches

Configuring Cisco Catalyst 9000 series for use with Livewire

Configuring Cisco SG350 Series of Switches for Livewire+®

Configuring Cisco Catalyst 3650 & 3850 for use with Livewire

Adding a multicast filter in your Cisco switch

Cisco Switch Password Reset/Recovery

Configuring a monitor (SPAN) port on a Cisco SG350

Bug in Cisco 3650 and 3850 firmware that could affect Livewire multicast

Enabling Fader Starts

Checking individual button press on Fusion - on line method

Fusion Replacement Fader Knobs (ABS)

Fusion Replacement Fader Knobs (RUBBERIZED)

Using the Count-Up Timer in Fusion and Element

Phone Control from Element / Fusion - VX

Testing Procedure for Fusion SmartSwitch Modules

Recording host and callers to separate channels using Vmode

Obtaining and Installing Fusion 3.2.1.28 for use with Pathfinder Core PRO

Replacing Fusion Button Caps

My Fusion console arrived with scratched lenses

Replacing a broken On/Off bezel on a Fusion module

What do the icons mean on my Fusion console?

I Have an Up/Down Arrow on My Fusion Overbridge

Manual Fusion Discovery and Pairing

Control Room Monitor volume does not adjust

Replacing Black Fusion Navigation and Phone Module Button Caps

Controlling Fixed Lines from the Input Channel

The CPU on the Fusion or Element shows 100 percent

Removing / Replacing a Fusion Surface Module

Replacing a Monitor or Headphone rotary encoder on Fusion or Element

Why does my Element or Fusion appear to insert random characters when trying to dial?

Why do I get audio drop outs on my Element or Fusion when I load a Show profile?

Cleaning and Lubricating Fusion Faders

Removing / Replacing a Fusion Overbridge Module

How to use a User Module in Fusion or Element consoles

Phone Control from Element / Fusion - Nx12 / TWO-x-12

Phone Control from Element / Fusion - Hx6 / iQ6

Setup Fusion Fader Accessory Module

Modifying a Backfeed using a VMixer

Enabling AUX busses in Fusion or Element consoles

Where is the grounding lug on my Element or Fusion console chassis?

Custom Backfeed options for Fusion and Element consoles

Adding Virtual Faders to Fusion or Element

Using Legacy Hybrids with Axia Consoles

Creating a Fader for a Remote Console's Program Audio with Talkback

Axia IP-Driver and AES67

Axia IP-Driver version 2.12.0.5 release and install information

Axia Driver appears to install and work fine but will not record

Configuring your computer firewall for use on Livewire networks

Axia IP Driver Sample Rate

IP Driver Blue Screen of Death (BSOD)

Unattended install of Axia IP-Audio Driver

Driver uninstall errors - how to manually remove the IP-Driver

Removing old installer inf files

Script to automate the Axia Advertisement Service restart

IP-Driver Troubleshooting

How to restart the Axia IP-Audio Driver advertisement service

Troubleshooting IP-Driver GPIO

My computer running IP-Driver does not show on the console and iProbe can't find it

Does the IP-Audio Driver require any other sound cards in the PC?

High jitter shown in the Axia IP-Driver control panel - Dropouts on record or playback

Other causes of high DPC latency affecting Axia Driver playback

Locating a lost IP-Driver license key

Setting up a Program like Zoom or Skype to work with an Axia Console

Adjusting IP-Driver Audio Levels

Configuring Axia IP-Audio Driver to send channels in SIP Unicast AES67 format

WideOrbit GPIO Considerations

After installing my Axia IP-Audio Driver it's grayed out and I can't make any changes

Allow or disallow IP-Driver Input to pass to the Output

Can I move my IP-Tablet license to another computer?

IP-Tablet Manual

What operating systems are supported by IP-Tablet software?

Updating legacy Axia nodes to eliminate Java

Restoring Node to Factory Defaults

Reset user password on Nodes

Destination Source list picker is blank

Clock sync issues on "classic style" Axia Nodes

Quasar User button to trigger Delay Dump in PF Core Pro

Logic that allows a single button to execute a different action on each press

Updating Label or Button titles with Pathfinder Core Pro Memory Slot values

Using Pathfinder to determine the owner of a Backfeed and make routes from it

Create a latching button on Core PRO

Using Pathfinder Core Pro to find were Livewire channels are used

Using a device's OnLine status to send commands

Monitoring Incoming Strings to Device Emulators in Pathfinder CorePro

Create a GPIO "pin" router in Pathfinder CorePro

Creating a simple talkback button in Pathfinder Core Pro panels

Manually removing an orphaned component from a Pathfinder Core Pro User Panel

Launching Pathfinder CORE Pro Panels in APP mode with Google Chrome

Enabling the virtual GPIO node in Pathfinder Core Pro

Pathfinder - Logic Flows for Beginners

Creating Custom Machine Start logic in Pathfinder Core PRO

Removing unwanted devices from Pathfinder Core Pro

Sending Silence Notifications with Pathfinder Core PRO

How to create a Logic Flow

Pathfinder displays repeated "Branch not Found" message

Using UDP to receive GPIO from an XDS satellite receiver

What do the colors mean in the Logic Flow Translators

How to create a user panel to control a console

Can I cluster my Pathfinder CORE Pro with my Windows Pathfinder server?

Licensing in Pathfinder Core PRO explained

Getting your old Color Picker back in Google Chrome

What happens if a Pathfinder Panel gets disconnected?

Virtual Faders on Panel Showing NONE and No Options

Why do my routes change when I reboot Pathfinder Core PRO

Using Pathfinder to trigger TalkBack in a Fusion or Element console remotely

Using Pathfinder Core PRO to configure console user buttons

Installing the Pathfinder Core PRO VM ISO

Creating a VirtualBox VM for Pathfinder CORE Pro

Activating Pathfinder CORE Pro Virtual Machine

What network ports are needed for Pathfinder CORE Pro Panels to work

Add Routing Control panels to Pathfinder

My GPIO or Audio Routes do not show up after migration

Logging Route Changes and Route Requests

Working with Pathfinder PC Backups

Limiting Pathfinder logging to a specific Protocol Translator

Setting up device connect or disconnect message in Pathfinder logs

Using delayed actions in Pathfinder stack events

Removing unused devices from Pathfinder PC Pro Server

Setting Individual Silence and Clipping Level Thresholds in Pathfinder PC

Turn on logging of all Pathfinder Stack Events

How to Manually Sync your Backup Server

Migrating Pathfinder to a new PC

Why aren't my new sources shown in Pathfinder?

Sending and receiving generic text strings with Pathfinder PC Pro

Turn on GPIO logging in Pathfinder Pro

Testing Powerstation IO Board

Powerstation Shipping Box and Foam

How to Rename a Powerstation

Outputs Not Working After Power Outage

Pairing a Powerstation Aux to a Powerstation Main

Setting up a PowerStation

PowerStation update to 3.0

What do the PSU colors represent on the PowerStation?

Password Reset via Element/Fusion Console Frame

Assign / Unassign an ETH4CAN Board to/from your Axia PowerStation or Studio Engine

Replacing the switchboard in an Axia PowerStation Integrated Console Engine

My PowerStation screen is blinking

Removing the cover from your Axia PowerStation Integrated Console Engine

Setting up a Local Source for Powerstation

Viewing and Editing the PowerStation's IP Address

Pair the internal switch and I/O boards in a Power Station

Modify PowerStation I/O Board to eliminate ESD Sensitivity resulting in Noise Level Increase on inputs

Why is the On Switch Blinking?

QOR Engine Advanced GPIO

How do I allow more than one source in Preview at a time

QOR Console - Channel OLED replacement

Radius/iQ Console - Disassembly for Cleaning

QOR Console Surface - Using Test Mode

Setting up a QOR for Single Mix-Minus Output to Dual Hybrid

CANbus Console Cable Lengths

QOR Console - Meter OLED Replacement

Axia GPIO for Show Profile Switching (iQ, Radius, RaQ, and DesQ series consoles only)

Axia QOR version 2.4.0.3 software, update instructions, and release notes

Firmware Package 5.59 for Axia iQ, Radius, RAQ & DESQ Consoles

Sources Can't Be Loaded on Expansion Console

VMIX Control Types explained for iQ series consoles (QOR - iQ, iQx, iQs)

Providing Phantom Power to Microphones

Connecting a Comrex VH2 to your QOR Console Engine

QOR Console Faceplates

QOR Console Faceplate Screws

Controlling a VMix with Console GPIO

Controlling Brightness on iQ-Series consoles

Why are there no meters when the channel fader is on and up?

QOR Engine - Viewing and Editing IP Address

Replacing Side Bumpers on iQ and Radius Consoles

QOR Console Dimensions

Using Two Consoles with a QOR Engine

Physical dimensions of QOR engines

Connecting an Expansion frame to an iQ or Radius Mainframe

Assigning a QOR V-Mix to a Fader, Physical Output, or Livewire output

QOR Engine Power Supply Specifications

Changing the backfeed on an IQ console

Axia GPIO for V-Mixer (iQ, Radius, RaQ, and DesQ series consoles only)

Why does my console show Src Load Err

Disassemble and clean a Radius or iQ console

Assigning individual Microphone GPIO in an IQ Console

Using the QOR Engine without Surface

Meaning of 'Livewire Mode' on the QOR Engine

Why is my microphone muted on my iQ or Radius

Preview speaker options for iQ-Series consoles

Using Automix for iQ, IQx, or Radius consoles

How do I automatically mute the Ringer when my IQ console is On-Air

Disable the IGMP Querier function on QOR for iQ and Radius

My iQ Overbridge Display Has Burn-in

Making a Physical QOR Source Available on the AoIP Network

How do I backup my iQx, iQ, or Radius console

Operating Temperatures of the QOR.16/QOR.32 iQ Engine

Converting iQ and Radius Consoles to Rack-mount Operation

Confirm proper reception of a Livewire channel on a QOR Console Engine

Creating Talkback Between Two QOR Consoles

Assigning GPIO to non-Livewire sources on iQ, Radius, RaQ, or DesQ

Confirming operation of a QOR via use of the internal serial port

Reset lost password on QOR consoles

Will the Axia IQ 6-Fader Phone module completely control the IQ6 Gateway?

Does iQx offer the same EQ and dynamics that QOR-based iQ has?

Phone Control from iQ Telco Expansion Console - Hx6 / iQ6 / VX

Creating a mix-minus on a QOR

Replacing 9mm Button Caps on QOR Consoles

iQ Input Channel Says "Used EW"

Phone Control from iQ Input Channel - Hx1 / Hx2

Replacing ON and OFF Caps on QOR Consoles

QOR Console Replacement Fader Knobs

Using talkback functions in iQ series and Radius consoles

My QOR console is unresponsive and my QOR engine has only one PSU light on the front panel

Where is the grounding lug on my QOR console chassis?

How to convert a new iQ overbridge board to work in place of an older style

My Quasar SR faders have a yellow arrow and don't work

My Quasar ON Light is Flashing

Axia Quasar Family Software v2.2.3 and Firmware v4.0.3 Release Notes & Update Instructions

Quasar Software Release Notes - All versions

Record Mode monitor settings for Quasar and Fusion

Quasar Link & PFL (Preview) mode explained

How do I get a Quasar Soft and Quasar Cast license?

Activating Quasar Soft and Quasar Cast on your Quasar console

Quasar Power Supply Configuration

My fader modules have the same sources labeled

Quasar MF1-ACC and MPC-ACC Modules

Dimensions of MF1-ACC and MPC-ACC Modules

Telos Alliance Virtual Showcase 2020 - Axia Quasar: The New Star in IP Consoles Webinar

Internal cables used for connecting Quasar modules

Quasar Direct-Mount Kit Installation Guide

Mix Engine Bit Depth

Quasar Surface IP Address Issue

Replacing a Quasar motorized fader

Creating a V-Mix in the Quasar Engine

Calibrating Quasar Four-Fader Modules

Why do the Quasar module network connections loop back to the distribution board?

Quasar Console Quick-Start Installation Guide

Creating Custom Source Pictures for Quasar

What are the default IP addresses a Quasar System ships with?

Quasar - Network speed requirement

Quasar Program Assignment & Monitoring Setup

Assign Sources to Quasar Input Channels

Quasar Input Source Creation and Configuration

Quasar Surface Layer Configuration

Configuring Quasar Engine Audio outputs

Checking connection to the Quasar Engine

Quasar Engine Installation & configuration

Quasar Surface fader module discovery & configuration

Quasar Surface Network Configuration

Quasar Surface Physical Connections

Quasar Replacement Fader Knobs

Quasar Table-Top Frame Dimensions

Top Panel Screws for Axia Routing Control Panels

Setting the panel type of the X1, X2, and XY Axia Router panels

Updating Axia Routing Control Panels

Factory reset Axia Router Control Panels

SoftSurface: Connect to a FANNED Studio Engine

What ports are needed for SoftSurface to remote control a console

Where are SoftSurface configuration files kept?

Using SoftSurface in Demo mode to remote control Axia Fusion or Element consoles

Locating a lost SoftSurface License Key

Microphone phantom power when using RJ45 adapters

Analog, AES and Microphone xNode DB-25 Pinouts

xNode, xSwitch, and xSelector Software Package v2.4.7 - Update Instructions & Release Notes

How to turn a DESTINATION into a SOURCE

Creating SIP Unicast connections in xNode

Using an xNode to create SAP advertised channels for Dante

Clicking on xNode AES3 outputs

Enable or Disable Telnet in xNodes

xNode Self Test Procedure

Mounting Two Telos Alliance xNodes in One RU Space

Proper node configuration for a backfeed (mix-minus)

Downloading SDP files from an xNode

Enabling SAP advertisement messages in xNodes

Flashing an xNode using a serial cable

Axia GPIO Basic Examples

What screws are needed for the "L" Bracket to mount two xNodes in 1 RU?

Controlling the xNode mixer with LWRP

Interfacing an xNode with the Comrex MultiRack

Delay in Audio on the Telos Alliance xNode

How to Factory Reset from the front panel

Shipping Box and Foam for an xNode

Viewing TCP connections to an xNode

Using the two network ports on an xNode for redundancy

What do the LED colors mean on xNodes?

Rack Mounting a Single Telos Alliance xNode

Surface Mounting for an xNode

Monitoring Stream Statistics from the xNode

How to factory reset an xNode using telnet

What is the impact of the Node ID field?

Microphone Gain on Mixed Signal xNodes

Setting the xNode up to receive an 8-channel (surround) stream

Why don't the meters work on my xNode web page

Sharing a Source with Two or More Console Engines

Can xNodes be used with standard POE Injectors?

Refreshing device information in iProbe

iProbe software is constantly asking to activate

Locating a lost iProbe license key

Forcing iProbe to use a specific network interface

iProfiler Wave Files

Archive Player in iProfiler does not list any recordings

How do I start iProFiler when my computer starts

My recorded archive files are shorter than the time they were set to record

When I click the iProfiler Server icon, the program does not start

Why doesn't iProfiler see mapped drives in Windows

Activating Skimming in iProfiler

Where is iProFiler configuration stored?

Can Axia iProfiler logger software run as a service?

Using Live Player to monitor iProfiler recordings

iProfiler displays activation error message

After installing iProfiler, my IP Driver is not activated

Locating a lost iProfiler license key

What ports does the iProfiler client

iProfiler Archive Won't Start

iProfiler archive files have the wrong time

Axia iQs (AE-1000) version 1.4.12 software, update instructions, and release notes

Error Message during Container Installation

Adding licenses to your iQs Docker container

Unable to add licenses for an iQs Docker container

Diagnosing iQs audio issues

Using the RECORD button on iQ or iQx for GPIO

Reset iQx Web UI Password

iQx Surface - Using Test Mode

Axia iQx version 1.4.12 software, update instructions, and release notes

Screws Needed for iQx Bottom Pan

Creating Talkback between two studios using iQx consoles

There's Audio Levels But All Faders Are Down

Connecting an Expansion frame to an iQx Console

Organizing Fader Numbers for an iQx with Expansion Panels

Updating software on your iQ series console

Can the xSelector output be controlled remotely?

Replacing the OLED of an xSelector

Using the Channel Filter feature in the xSelector

Using a Paravel Systems WallTime On-Air light with Axia consoles

RJ-45 to balanced or unbalanced audio cable wiring

Axia GPIO for Control Room Monitor

Shortcut to quickly cycle through sources on an Element or Fusion fader

External Preview: The Basics

What multicast addresses are used by Livewire

Setting up System Timers in WallTime Clocks with Axia Consoles

List of TCP and UDP ports used for Telos products

Optimizing Chrome for Accessing Web Interfaces

Using NodeLogger for logging individual devices

Backfeed (mix-minus) settings explained

Using a Dante® AVIO™ adapter with Livewire

Generating SDP Files

Playing Livewire™ streams with standard media players

Confirming Dante clocking when using AES67

Using Dante™ devices with Telos Alliance devices

Setting up a Syslog Server

Axia GPIO Pinout

The Program 4, Record, and Phone busses

Recording host and callers to separate channels using the record bus

How to start any program as administrator

Install Livewire GPIO filter plugin for Wireshark

Methods for using SAGE ENDEC EAS equipment in the Livewire Environment

Adding the Loopback Adapter to Windows networking

Example SDP File

Devices or Livewire sources are missing or not discovered automatically

Disabling the Media Sense feature on a network interface

Comrex Access NX and Rack PTP clock

Setting Livewire clock when used on a wireless STL

Axia GPIO for Control Room Guest Mic Profiles

Axia GPIO for Operator Microphone Source types

Axia GPIO for Record Mode

Axia GPIO for Film Cap Buttons

Axia GPIO for Studio Feed Source types

Axia GPIO for Computer Player Source types

Axia GPIO for Codec Source types

Axia GPIO for Phone Source types

Flashing SYNC Indication on Livewire Devices

"To Source" vs. "From Source"

Finding the startup folder on Windows operating systems

Using Indicators in AudioVAULT to make routes

How to connect non-balanced devices to RJ-45 inputs and outputs

Using USB network adapters for Livewire

Do I have to set all my devices to PTP clock to use AES67?

Simple Tools to Remote Control your Console - A simple Pathfinder Panel

Axia GPIO for Studio Guest Mic Profiles

AES67 and Livewire backfeeds (mix-minus) - How?

Setting up SMTP server for email relay

Building microphone test cables for Axia devices

Building a GPIO test connector for Axia

Axia GPIO for Control Room Producer Source types

Axia GPIO for Studio Monitor

Setting up and using XDS receivers for Livewire

Livewire Channel Numbering

Improving audio latency using and the iQx and iQs consoles

Setting up an On-Air light

Calculating a multicast address from Livewire channel number

I received the error "Incoming packet flow stopped for subscribed stream ID"

Axia CANbus Specifications

Designing Livewire Channel Numbering Schemes

How far can I run an Axia network cable?

Using the Awrite utility to write images

Components of a Axia CANbus cable

Interpreting Livewire clock SYNC data

Recommendations For Cleaning and Sanitizing Consoles and Equipment

Sources do not appear in the list for some channels

Axia GPIO for Line Source types

My SAP Stream is Not Being Watermarked

Is Dolby Digital out the same as AC3?

Telos Alliance Virtual Showcase 2020 - Tools for Next Gen TV Webinar

What is the max amount of video delay in the SDI AoIP node

AudioTools WorkflowEditor Overview

AudioTools WorkflowEditor In Depth

Using SurCode with Adobe Media Encoder

What is the plug-in latency or delay introduced by SurCode for Dolby E Encoder?

What To Do If Your SurCode License Does Not Appear In A New Version of Adobe CC

Generating a license request file for SurCode for Dolby Digital Plus for Adobe Creative Cloud

How To Deactivate CodeMeter Licenses

Dolby Metadata Guide

Dolby Digital Plus Primary Level Metadata Parameter and What It Does

How to Apply a CodeMeter Activation File

Can I activate my SurCode Creative Cloud product with my SurCode Creative Suite license?

Why is Dolby Digital required for encoding optical media?

Dolby Digital Plus Primary Level Metadata Parameter and What It Does

Can SurCode for Dolby Digital Plus Encode Dolby Atmos?

What is "Primary Level" in terms of Dolby Metadata?

What is the difference between Dolby Pro Logic II and Dolby Digital?

Why is Dolby Digital 2 channels?

Will my SurCode for Dolby E iLok license active Stream Player?

Using Dolby E Encoder with Nuendo 4

Dolby E Encoding in Pro Tools

What is the difference between a channel and a program for Dolby E?

What is Dolby metadata?

What type of file formats are accepted as a Dolby E file?

Where is Dolby E Used the Most?

Why use Dolby E? Why not use Dolby Digital?

Dolby E Guard Band

Can I Encode Dolby Digital or PLII into a Dolby E Stream?

Decoding Dolby E with AudioSuite in Pro Tools 2018.7-2018.12

Dolby E Basics

Dolby E Sync and Offset

Dolby Digital vs. Dolby E

Dolby E Encoding Checklist

How to Decode Dolby E to PCM in Adobe Premiere Pro CC

96kHz Sample Rates with Dolby Pro Logic II

SPLI Workflow for Adobe Audition

Balancing Stereo and 5.1 Mixing with a Dolby Pro Logic II Stream

SurCode: Adobe 22.5 Update Removes Plugin

Pro Tools Error 9128

Troubleshoot Lost DDCC License

When I play my DTS-encoded CD or files, all I hear is noise. Why?

Why is there a price difference between SurCode for Dolby E Decoder and SurCode for Dolby E Stream Player?

Why won’t my Dolby receiver play my SurCode DTS CD/DVD files?

Will 1 license for Dolby E work in both Pro Tools and VST at the same time?

SurCode: Compressor 3 Outputs Empty File

SurCode CD-DTS: How to run with 64-bit compatibility mode

Does Surcode work with Apple M1?

iLok Activation

iLok Synchronize when license is not seen by DAW

Pro Tools does not see my iLok license(s)

What to Do In Case of CodeMeter USB Bus Failure

What is needed to activate an iLok-protected product?

When opening an WAV/BWF file, my audio software crashes. What should I check?

MPX Node v1.5.0 - Release Notes and Update Instructions

MPX Node v1.3.35 release notes and update instructions

How to Factory Reset the Omnia MPX Node from the front panel

License Preservation When Switching Between Encoder & Decoder

Converting MPX Nodes between Encoder and Decoder

Shipping Box and Foam for an MPX Node

uMPX "Limit Rate Below" Setting

Configuring MPX Nodes for redundant streams

MPX Node Licensing FAQ

Optimizing Modulation and Minimizing Overshoots With MPX Node Pair

Ensuring RDS Bit Errors Do Not Occur

How to configure error correction and calculate bandwidth on the MPX Node

Configuring an MPX Node Decoder to receive multicast

Configuring the Encoder MPX Node to send Multicast

Enabling licensed features in MPX Node

Rack mounting a Single MPX node

Using Physical GPI to Select the Primary Input Source for Omnia ONE

Gaining access to the remote control page

Converting an Omnia ONE to AM or FM

Password Reset for Omnia ONE

Restoring the Omnia ONE Livewire Page in the Web Interface

Obtaining Logs from the Voco 8

How to Copy Presets from One Unit to Another in Voco8

How to Set up the VOCO 8 For Livewire I/O

How to use Mono/Stereo on AoIP Inputs/Outputs on the Omnia VOCO 8

Omnia Volt (and Omnia One) Input Failover Information

Using Physical GPI to Select the Primary Input Source of the Omnia Volt

Volt AGC "Activity" and "Texture" Controls

Why is "BP" displayed on my VOLT?

Converting Your Omnia VOLT To Another Style

Omnia VOLT Software update procedure

Changing the Volt Input Source via Telnet

Adjusting the Volt's Wideband AGC Gating

AES Input Failover - Does it Monitor AES Sync?

Settings for NRSC Pre-Emphasis in VOLT AM

What ports are needed to access an Omnia VOLT® Remotely

Password Reset for Omnia VOLT audio processors

Setup of the VOLT FM for Mono

Setting The Input Failover Time to 60 Seconds

Software Update Omnia-3

How to reset Omnia Classic and Omnia-3 passwords

Changing Omnia-3 Passwords

Setting the Backlight to Turn-Off Time

Finding the Omnia-6 Remote Software App and Software Update

Software Update Omnia-5 and Omnia-6

Uploading Presets to the Omnia-6

How To Avoid Bricking The Omnia-6 Front Panel Board

Password Reset For Omnia-6 or Omnia-5 EX

Setting Up Preset Scheduling in the Omnia.11

Managing Omnia.11 Presets

Omnia.11 Handle is Stuck Open

Using Older v1.x Omnia.11 Orange Mode Presets in v3.x and Above

Using Java with Omnia.11

Can my Omnia.11 be upgraded to G-Force and Perfect Declipper

Do you repair Omnia.11 power supplies?

Turning Off the Internal RDS

Replacing Your Omnia.11 Touchscreen

Omnia.11 Input Failover - Comparative Fail

Password Reset For Omnia.11

Omnia.11 "AES Sync" Indicator

G-Force Improvements in v3.5 and Higher

Calibrating Omnia.11 Touch Screen

Operating Temperatures of the Omnia.11

Setting Up The Patch Point In The Omnia.11

Omnia.11 Shipping Box and Foam

How to Backup/Restore my Settings of an Omnia.7 Audio Processor

Top Panel Screws for Omnia.7

Factory Reset an Omnia.7 Audio Processor

Omnia.9 Rack Ears

Getting a Post-Failover but Pre-Undo Output from Omnia.9

How To Configure a “Program Without Delay” Output on Omnia.9

Setting Up Nielsen Encoding in the Omnia.9

Omnia.9 version 3.30.79 Software Install and Release Notes

Installing Kantar Licenses on Omnia.9

Using Analog MPX as a Backup to Omnia Direct (MPX over AES) in Omnia.9

Updating the Dice Firmware in Omnia.9

Omnia.9 version 3.20.20 Software Install and Release Notes

Password Reset For Omnia.9

How to Backup/Restore my Settings of an Omnia.9 Audio Processor

Using the Omnia.9 Patch Point for Rating Encoders/Voltair

No uMPX Streams MkII O9 When Using Livewire

Setting Up the Omnia.9 to Broadcast in Mono

How do I get and use the Omnia.9 Remote Control application? (NfRemote)

Using MPX Over AES (Omnia Direct) on the Omnia.9

Setting Omnia.9 AM Pre-Emphasis and Low-Pass Filtering

Screws Needed to Remove Top Cover of Omnia.9

Factory Reset an Omnia.9 Audio Processor

Using RT+ on Omnia.9/9.SG RDS

Using the Omnia.9's Internal Player

Check This if Streaming Stops Working on Omnia.9 MkII

Setting Streaming to use Audio Input 2

Installing and using the RDS Translator for Omnia.9

Using the Omnia.9 Auto Balance Feature

Omnia.9 Output Settings for AM

Setting Omnia.9 Silence Detection Duration

Setting Diversity Delay in Omnia.9

Omnia.9 Dual FM and MPX/uMPX Output Routing

Setting The Processing Adjustment Level (Basic/Advanced/Expert)

Setting Up a Studio Processing Output

Finding and Downloading the Omnia.9 SNMP MIB File

Scheduling a Preset Change in Omnia.9

Passing Low Frequency Automation Tones Through Omnia.9

Using NfRemote to Monitor Loudness

Help with Omnia.9 and FM and HD blending issues

Licensing and Configuring µMPX Encoder

Using An AES67 Stream To Feed Omnia.9 (MkII Only)

Setting Up Omnia.9 For FM Pre-Emph Output via AES/EBU

Do you repair Omnia.9 power supplies?

Easily Grabbing Task Script Paths Using NfRemote

Omnia Full Screen Display on Startup with NfRemote

What are the multi-band frequencies on the Omnia.9

Omnia.9sg version 3.30.73 Software Install and Release Notes

How to Backup/Restore my Settings of an Omnia.9sg Stereo Generator

Updating the DICE Driver

Factory Reset an Omnia.9sg Stereo Generator

Downloading Cue Tone Files for Local Ad Insertion

Omnia.9sg version 3.20.04 software install and release notes

Setting Up .9sg For Silence Or Internal Player GPO

Using the Omnia.9sg with the Omnia.11

Licensing and Activation of Omnia SST

Why won't OmniaSST Decoder generate a valid key?

OmniaTools PC Specs

Are Omnia PSUs the same?

Sharing NfRemote Settings

Omnia Composite Output Impedance Setting or Jumper

Telos Alliance Virtual Showcase 2020 - What's New With Omnia Webinar

GPIO Schematic for the Hx1 and Hx2

Default Settings for Rear Panel DIP Switches

Replacing Button Caps on an Hx1/Hx2

Hx1 / Hx2 Box and Foam

Using the on-board diagnostic mode

Using and Hx1/Hx2 with a QOR Console

Can an Hx1 and Hx2 answer a call automatically?

Converting an Hx1 and Hx2 between AES and Analog

Are two mix-minuses needed when using an Hx2?

Hx1 or Hx2 freezes or locks up, requiring reboot

I forgot my Hx6 / iQ6 Password

Can I use my HX6 or iQ6 hybrid for two different studios at the same time?

Known issue with xScreen and Hx6 / iQ6 v7.0.0r Software

Replacing the button caps on an Hx6/iQ6

Renaming Lines on your VSet with an Hx6 or iQ6

The Hx6 Doesn't Power a VSet

Blocking Only Certain Calls Using an Hx6 or iQ6

How to use Call Screening Software Remotely with Hx6 or iQ6

No Caller ID Display - Logging Caller ID decoder

It looks like a caller is on hold after they hang up

Converting an Hx6 between Analog and AES

How to factory reset the Hx6 or iQ6 Talk Show systems

What remote control capabilities does the Hx6 and iQ6 have?

Configure Line Ringing on iQ6 or Hx6 using Livewire GPIO

How to reset admin password in VIP

How to resolve "Remote MediaStream"

Adding Beacon Container Manually

Updating VIP to v2.3

How to enable Telos Connect on VIP

How to find and download logs for VIP panels

Creating a permanent password for Portainer

Troubleshooting network issues

Passing audio between Pliant and Infinity intercom systems

Replacing a broken paddle switch on an Infinity Panel

Copying key assignments from one device to another device

How to configure a Group

How to update your Infinity devices through Dashboard

Changing Web Password From Master Panel and Desktop Station

Interfacing an xNode and Infinity System with Pliant CrewCom

Infinity Portal Overview and Account Creation

How to configure a Partyline

What's the difference between Groups and Partylines?

How to configure an IFB

Checking the network settings for Dashboard

Replacing the belt clip on your Telos Infinity Beltpack

Protection for a Telos Infinity Beltpack

Dashboard does not see any panels

Rack Ears for Telos Infinity Panel

How to set up a connection over Link

Configuring your Infinity intercom system to talk with your Axia IP Intercom

Dimensions of the Infinity Desktop intercom station

How to interrupt a backfeed from an Axia console

How to add an AES67 stream to your Infinity system

Dimensions of the Infinity Beltpack

Setting the password used for Livewire devices in Dashboard

Telos Alliance Virtual Showcase 2020 - Harnessing the Power of Telos Infinity IP Intercom Webinar

Installing Dashboard

Plastics specifications for Infinity IP Intercom Products

The volume control on the Infinity Beltpack

Updating Software on Nx6 and Nx12

Refurbishing a Desktop Director

Blocking Only Certain Calls Using an Nx6 or Nx12

Fixing Caller Audio Problems with Nx6 or Nx12 Talk Show Systems

Replacement Label and Clear Overlay for Desktop Director

Button Caps for a Desktop Director

Configuration Backup from Nx6 or Nx12

What power supply can I use for extending Desktop Directors

Converting an Nx6 or Nx12 between Analog and AES

Switch Console Refurbishment

SHOUTcast server example for the Z/IPStream R/1

Adjusting the Screen Saver Settings

Finding and Changing Username and Password Information

Activating Telos Connect (Support Link) on the Z/IPStream R1

Setting Up a Syslog Server for Logging the Z/IPStream R/1

Creating new, or editing old processing presets in Z/IPStream R/1

Updating Z/IP Stream (formerly ProStream) R1 to v. 3.0.3r

Metadata to my Icecast server is not working on my Z/IPStream

Adding metadata filters to the Z/IPStream R/1

How To Set The Z/IPStream R/1 To Stream From Both Network Ports

Using Cirrus streaming in the Z/IPStream R/2 or X/2 software

Logs in the Z/IPStream R/2 explained

Adding and Configuring Metadata Filters in Z/IPStream R/2 and 9R/2

Activating Telos Connect (Support Link) on the Z/IPStream R/2

How do I download metadata logs from the Z/IPStream R2

Z/IPStream R/2 Frequently Asked Questions

Sending metadata to the Z/IPStream R/2 integrated Triton encoder

Firewall Lockdown Settings in Z/IPStream R/2

Aligning cue points (metadata) with audio for Triton Digital

Updating your Z/IPStream R/2 to version 1.07.04

Using Axia GPIO to control Z/IPStream R2 Metadata

Processing audio for Triton streaming encoder in the R/2

I stream with Triton, how do I add my stations to the Z/IPStream R/2?

How to find the Output Level control when using Omnia.9 Processing

Using your metadata configuration to send an end-of-break marker

Handling the need for blank events in Metadata to stop commercial insertion

Operating Temperatures of the Telos Z/IPStream R/2

What Time Zone are my logs written in?

Z/IPStream X/2 Manual License Activation

Editing Presets in Z/IPStream X/2

Adding and Configuring Metadata Filters in Z/IPStream X/2 and 9X/2

Migrating Z/IPStream X/2 or 9X/2 Settings to a New PC

Using an (Omnia or Z/IPStream) A/XE Preset in Z/IPStream X/2

Adding Licenses to Z/IPStream X/2 and 9X/2

Using the Axia Livewire+ Audio Driver with Z/IPStream X/2 or 9X/2

Using Axia IP-Driver In Place of VAC (Virtual Audio Cable)

Firewall Considerations for Telos Connect

Using WatchFile2Tcp Utility to send metadata

Determining the number of Licenses on a Z/IPStream R/2 or X/2

Creating local "listening" instance on Z/IPStream

Metadata2 filter functions

How does the Z/IPStream handle album art for music?

Kantar watermarking for streaming - How does it work?

What Lua libraries and what version of Lua do your Streaming products use?

What determines streaming sample rates?

Locating a lost ZIPStream username and password

Metadata Tools - Using MetaDataCapture to capture sample data from your automation system

Metadata Tools - Using MetaDataSend to send sample data for streaming

Adding a new metadata filters to Z/IP Stream X/2 or 9X/2

My HLS streaming fragments are smaller than the duration

Fragment file names used in HLS streams

Calls Always Get Assigned to Fader Two

My VSet won't lock calls on air

Box and Foam for a VSet

Headsets that are compatible with the Telos VSet

How to mute the ringer for specific lines on a VSet

VSet Lines Are Blank, What Can I Do?

Screening Calls for Multiple Studios Using a Single VSet

Telos VSet - Using Test Mode

Button Caps for a VSet6 and VSet12

Button Caps for VSet Console and Desktop Controllers

VSet Ringer Mute / Volume

I can't put calls on the air from the VSet

Telos VSet - Setting IP Address

Delay Dump ($%!) Button

Telos VSet - Changing Studio

Telos VSet - Reset to Factory Defaults

FreePBX - Forward When Extension is Unavailable

FreePBX - How To Create and Route an Extension

Do I Need an Asterisk (FreePBX) Server?

FreePBX Reset Root Password

FreePBX and VX - Call Troubleshooting

FreePBX - What Is An Extension?

Basic FreePBX (Asterisk) Operations

Configuring an IP address in AT Branded Asterisk PBX

Choking an Extension

Outgoing Announcements and Custom Recordings

Calls Placed on hold from the VX drop after 30 seconds

Using Wireshark to Log Interfaces

How to Enable VNC on your FreePBX (Asterisk) Server

How to Enable Asterisk Debug Logging

How to Forward Calls from your FreePBX (Asterisk) Server

Can't access FreePBX (Asterisk) web UI after configuration restore

Logging in to Asterisk

Announcement Technologies FreePBX (Asterisk) Server NIC Layout

How to Backup and Restore FreePBX (Asterisk) Configuration

Blocking Incoming Calls by Phone Number Using Asterisk

Obtaining logs from a VXs system

Manually refresh a license in VXs

The PTP4L container on the VXs Host keeps Rebooting

Configuring VXs Studio inputs and outputs for AES67

Adding or Changing lines (extensions) assigned to Telos VX Shows

Line Ringing Indicators and VX

Using CPSIP and SIP Debug Logging in Legacy VX Systems

Adding Extensions in VX

Update instructions and release notes for VX Enterprise and Prime+ version 1.3.2

Hybrids in VX - Viewing, Creating or Changing

Activating and Configuring AEC (Acoustic Echo Canceller) in Telos VX

VX Default IP Address

Kari's Law and Ray Baum's Act Compliance

Using "Fixed" lines in VX to always assign lines to dedicated faders

VX Won't Pass the "+" Symbol (E.164 Compliance)

"Unauthorized" Error during Container Installation

Sound Effects and Call Disposition Tones

Disable time sync service in Ubuntu to not interfere with PTP4L

VX SIP Configuration page, descriptions and use of fields

Blocking All Calls with a VX

VX Extension Registration Workflow

How to use Call Screening Software Remotely with VX

Determining the MAC address of VX Engines

Adding Custom Ringtones to your VX

Creating Auto-Answer Call-in "Listen" Lines in VX

Do I need an AoIP switch if I only have one xNode?

Loading a VX Show into a Studio

VSet Custom Ringer sounds and the VX System

VSet assigned to wrong Studio / No VX Audio at the Console

Installing version 1.1.0.2 software for VX Enterprise and Prime+

25/7 PDM - Delay Dump Control from VSet

Backing up and Restoring your VX Configuration

Inbound Calls Connect But Drop After Six Seconds

Telos VSet port forwarding

Setting up a VX Talkshow System (General)

How is a VX system laid out?

Prevent VX Producer from playing ringing tone

How to Update VX Software

In Telos VX, I can't make changes to Studios or Shows - they are greyed out.

Setting up a VX Studio (without an Axia Console)

Setting up a VX Studio (with an Axia Console)

Addressing audio latency or delay in phone calls

Using a single Z/IP ONE to feed several

Resetting a Z/IP ONE to Factory Defaults

The Z/IP ONE and Livewire GPIO explained

Backing up a Z/IP ONE

Z/IP ONE Software v6.0.0r Update Instructions and Release Notes

Telos Z/IP ONE - Managing Connections

Shipping Box and Foam for a Z/IP ONE

My Z/IP One needs a new static MAC address

Cannot connect to the Z/IP Server

Finding the Serial Number of a Z/IP ONE From the Web UI

Z/IP ONE is Not Booting and only the Blue LED is Flashing

Setting Redial Mode on the Z/IP ONE

Identifying front panel OLED type on a Z/IP ONE

Web Page meters show "unavailable" on the Z/IP ONE

Sharing Internet connection from a Windows PC with your Z/IP ONE

Replacing the OLED and Front Panel PCB in a Z/IP ONE

I have lost or can't remember my Z/IP ONE password

Adjusting the Z/IP ONE buffer to help with drop outs

Adding a serial adapter to your Z/IP ONE

Telos Z/IP ONE Power Cable Field Replacement

Using WiFi with your Z/IP ONE

Using Ethernet Mode in the Zephyr Xstream

Can I Connect a Zephyr Xstream with a Z/IP ONE?

Replacing the display window on your Zephyr Xstream

Replacing the LCD display screen on your Zephyr Xstream

Updating iPort PLUS to software version 2.2.2a

Connecting an iPort and Z/IP ONE using RTP Push

Installing the iPort version 2.4.4a patch release

Using a GPIO node to send iPort contact closures

iPort Status explained for GPIO and SNMP Traps

Enable or Disable the SNMP service on iPort High Density

Installing iPort High Density update version 3.1.0

Setting iPort High Density password or enabling WAN login

How to get into a Docker container shell

How to install ping utility in Ubuntu

IMPORTANT! Surge protection information for your new product

Telos Alliance W-9

2023 Telos Alliance holiday hours

Telos Alliance Repair Process

Rack Rails used in Telos Alliance 1RU devices

Finding The Serial Number of Your Unit

VMware configuration suggestions for Windows with Livewire or AoIP

Conferencing Calls on Telos Hybrid Systems

Product Manuals Now Online

Enabling Advanced Logging on an Nx12, Nx6, Hx6, or iQ6 Telephone System

Telos Alliance Not Affected by Log4j Vulnerability

Supermicro Hardware IPMI Instructions

POTS Hybrid Does Not Hang Up Automatically

Telos Alliance Brand Jewel Stickers

What is the difference between the Z/IPStream R/1 and Z/IP ONE?

Replacement of Push-Button Switches in Legacy Products

How to Make a Switch Console Cable

The Phone Hybrid and Trans-Hybrid Loss

Line Sharing Between Two Phone Systems

How to use port forwarding with your Telos Alliance devices

How do I pay for my repair or parts order?

Ground Shipping Times from the Telos Alliance Factory

Container University 301: Hands-On with Your Virtual Studio, Air Chain, Talkshow, and Intercom

Container University 206: Redundant Virtual Broadcast Systems for Backup, Work Sharing, Disaster Recovery

Container University 205: Security vs. Convenience

Container University 204: Staying in Sync Without Losing Time

Container University 203: On-Premises, Data Center, or Cloud - Where is Your Virtualized Broadcast Neighborhood?

Container University 202: Multicast, Unicast, & CODECs Connecting Virtual Broadcast Equipment

Container University 201: Hardware Requirements for Virtualized Broadcast Equipment

Container University 101: WHY Broadcasters Are Moving to Standardized IT Infrastructure

All Categories > Axia > IP-Audio Driver > Using Windows 11 with the Axia IP Audio Driver

Using Windows 11 with the Axia IP Audio Driver

Updated 1 month ago by Bryan Jones

Scope

This document covers the Microsoft release of Windows 11 with Telos Alliance products, specifically IP-Driver.

Description

On October 5th, 2021, Microsoft began rolling out its new Windows 11 operating system. Many broadcast facilities heavily use Windows software as part of their audio workflows for over the air and streaming. Several Telos Alliance products use Windows, including our Axia IP-Audio Driver for Windows.

Because of the critical nature of the affected systems, we recommend waiting 60-90 days before installing the update.

We encourage you to send us feedback, and we will report back when we have more information to share.

Additional Details

We have no evidence to suggest that it will NOT work. The issue is the unknown nature of Windows 11 and any long-term effects. We always appreciate and value feedback from our customers. If you have already installed the Axia IP Audio Driver using Windows 11 we would welcome feedback with your experience. While we can not specifically provide support for Windows 11 at this time, having feedback from you will help us focus our testing.

Let us know how we can help

If you have further questions on this topic or have ideas about improving this document please contact us

How did we do?

(opens in a new tab)